Home/Drones/FPV Drones/15-Inch FPV Drone

15-Inch FPV Drone

Name: 15-Inch FPV Drone
Brand: Puyu Drone
Availability: PreOrder

Heavy-Lift 15-Inch FPV Platform

A 15-inch heavy-lift FPV airframe with a 700 mm True X T300/T700 carbon frame. It lifts 7.5kg, flies 35 minutes empty and 8 to 15 minutes loaded, and keeps a stable 3W video and ELRS control link out to 10 km or 5000 m altitude.

7.5kg Payload
Useful payload reaches 7.5kg, the highest in this FPV range.
10 km Control Range
Control and video stay linked out to 10 km from the pilot.
130 km/h Top Speed
Top speed reaches 130km/h even with the larger airframe and props.
5000 m Ceiling
Maximum flight altitude reaches 5000m, covering high plateau and mountain work.

True X Carbon Fibre Heavy-Lift Frame

A True X layout with a 700mm wheelbase, built from 3mm T300/T700 carbon fibre plates top and bottom, 10mm arms and a 20mm electronics layer. Arm assembly measures 520×520×25mm. Stack mounting holes are M3×30.5mm, video transmitter holes M2×20/25.5mm and M3×30.5mm, and motor mounts M4×30mm.

Extra-Heavy-Lift Power System

5315 brushless motors rated 380KV on 6-8S, each producing up to 8768g of thrust — roughly 35kg of total lift. Maximum current 101A, maximum power 4257W, no-load current 2.0A/10V, phase resistance 30mΩ, motor weight 310g at Ф61.5×64mm, paired with 15×7×3 tri-blade glass-fibre nylon propellers. The complete aircraft carries 7.5kg of payload, flying 8-15 minutes loaded and 35 minutes unloaded, with a top speed of 130km/h and a 5000m ceiling.

Flight Controller & 8S ESC

The F722 flight controller runs an STM32F722RET6 MCU with an ICM42688 gyro and DPS310/SPL06 barometer, 16MB onboard blackbox and AT7456 OSD, on Betaflight firmware with six serial ports. It measures 40.6×40.6×9.8mm at 19.6g. The 80A 8S ESC handles 80A continuous and 100A burst, accepts 8S input, and measures 56.2×57mm at 28g.

Long-Range Video Link & Imaging

The 5.8G video transmitter runs 3W across 40 channels on the IRC protocol, with an MMCX antenna connector, measuring 54×28×13mm at 32.5g. The B19 camera delivers 1500TVL from a 1/3-inch CMOS sensor with a 2.1mm lens, 0.001Lux minimum illumination, D-WDR and 3DNR, powered from DC 5V-30V. The control link uses an ELRS 915MHz receiver on CRSF, with telemetry output below 17dBm and WIFI firmware updates.